Last Updated: 10/24/2016
Only $21.99 for Xigmatek strives to create reliable earth-friendly powerful thermal solutions. The HDT-SD964 is no exception as it's designed to provide supreme performance while remaining whisper quiet. Four 6mm sealed copper heat pipes draw heat away from the solid copper base. The array of aluminum convection fins is penetrated by these heatpipes and efficiently dissipates the surplus heat. They are cooled by the 54.6 CFM of cooling air generated by the 92mm rifle bearing fan at its maximum speed of 2800RPM. Even though the fan generates a relatively quiet 30 dBA of noise at this top speed it can be automatically controlled by the BIOS through the use of the built-in PWM support. When the computer detects a lower thermal need the fans speed can be reduced which in turn lowers the audible level. A second fan can be added on the other side of the array for additional cooling if desired. The HDT-SD964 rests on rubber shock absorbers which eliminate any vibration which may be transferred to the motherboard  thus eliminating any possibility of noise. It connects securely through the use of either push pin or a tool-less clip. It supports Intel's Core 2 Extreme -Quad Duo Pentium Extreme Edition and Pentium D chips along with the Celeron D and AMD's Athlon 64 FX X2 in addition to Opteron and Sempron processors. Type: Fan & Heatsinks RPM: 1200-2800RPM Air Flow: 39-54.6 CFM Noise Level: 22-30 dBA Power Connector: 4 pin with PWM Heatsink Material: Base Material : Copper (Heat-pipe Direct Touch) Fin Material : Aluminum Alloy Compatibility: Core 2 Extreme / Quad / Duo Pentium Extreme Edition / D Celeron D Athlon 64 / FX / X2 / Opteron / Sempron Fan Dimensions: 92(W) x 92(H) x 25(D)mm. SKU N82E16835233014 in the CPU Cooling category.
Shipping to USA Shipping USA and Canada Shipping Canada
Order fulfillment by: Newegg