Last Updated: 12/6/2016
Only $28.99 for Dynatron's P199 cooler is primarily intended for use in Intel-based servers but it is also able to provide a low profile cooling solution for other Intel-based CPUs. The variable speed 80mm fan moves 15CFM of air at its full 5000RPM with a 49.8dBA noise level. It can also be set to run at lower speeds with a reduced sound signature. The attached heat sink is only 2mm wider than the fan and its all-copper construction efficiently draws heat away from the CPU for diffusion on the copper cooling vanes. The P199 is compliant with the EU's RoHS standards for reduced hazardous material in construction making it more earth-friendly. In addition to supporting a wide variety of processors it supports 130W chips. The entire unit is only 2mm wider than the 80mm fan and has an overall height of 28.5mm  making it able to fit into tight locations in order to maintain stable processor operations and prolong the life of the CPU. It can be oriented as needed and a slim backplate supports the cooler without impacting solder joints. Type: Fan & Heatsinks RPM: At Duty Cycle 20%: 1000RPM At Duty Cycle 50%: 2500RPM At Duty Cycle 100%: 5000RPM Air Flow: At Duty Cycle 20%: 2.508 CFM At Duty Cycle 50%: 7.214 CFM At Duty Cycle 100%: 15.0 CFM Noise Level: At Duty Cycle 20%: 20.5 dBA At Duty Cycle 50%: 35.6 dBA At Duty Cycle 100%: 49.8 dBA Power Connector: 4 Pin Heatsink Material: Copper Compatibility: Intel Socket 775 Quad Core Q6700 & Q6600 Core 2 Extreme X6800 Core 2 Duo E6850 Pentium Dual-Core E2180 Pentium D 960 Pentium 4 Extreme Edition Celeron D 365 & Socket 775 Dual-Core Xeon 3000 Sequence for 1U Server Fan Dimensions: 80 x 80 x 15mm. SKU N82E16835114075 in the CPU Cooling category.
Shipping to USA Shipping USA and Canada Shipping Canada
Order fulfillment by: Newegg